CISO autmotic dual-line systems can be used on large systems with dispersed lubrication points that require varying lubrication quantities. These central dual line lubrication systems utilize two main lines that are supplied alternately with lubricant from a high-pressure pump via a change-over valve at up to 400 bar (5 800 psi) Branch lines, along the main lines, are connected with dual-line metering devices to supply a large volume of lubricant to the lubrication points Within large dual-line systems, end-of-line pressure switches are used to control and monitor the centralized dual line lubrication systems.
MTP Manually Operated Pump
The MTP manual pump is specifically designed for lubrication points that do not require continuous lubrication, capable of re- liably and accurately delivering lubricant. Constructed with a robust design, the pump features dual-piston drive and is equipped ...
ZP08/14/24 Lubrication Pump
The ZP08/14/24 pumps are used primarily in dual-line systems or as supply pumps and have a maximum operating pressure of 400 bar (5 800 psi). Depending on the system layout, these electric pumps can supply lubricant at distances of up to 100 meters and more ...
DSG Dual-line Grease Metering Devices
The durable, galvanized steel DSG grease metering devices are designed for dual-line systems with pressures of up to 400 bar (5 800 psi). These metering devices are available with up to eight outlets, and each pair of outlets is equipped with an indicator pi...
DSKH Metering Devices
The durable, galvanized steel DSKH metering devices are designed for dual-line systems with pressures of up to 400 bar (5 800 psi). These metering devices are available with up to eight outlets, and each pair of outlets is equipped with an indicator pin for ...
DSL Dual-line Metering Devices
The durable, galvanized steel DSL metering devices are designed for dual-line systems with pressures of up to 400 bar (5 800 psi). These metering devices are available with up to eight outlets, and each pair of outlets is equipped with an indicator pin for ...
WP-C Electric Change-Over Valve
WP-C Electric change-over valve is an integrated detention control device which uses a large torque. DC deceleration motor to drive the valve sliding core to move in order to open and close the oil supply pipeline or change the direction of oil supply. It is...
DU-C Hydraulic Change-Over Valves
DU-C are hydraulic change-over valves designed primarily for use in dual-line lubrication systems These change-over valves alternately discharge lubricant, fed by the pump into one of the two main lines The other line is connected to the return line connecti...
MC-ⅠSystem Control Box
The MC-Ⅰcontrol equipment is a specialized device exclusively designed for the efficient management and precise control of a centralized lubrication system. It houses a dedicated card internally, which is responsible for controlling the inlet and outlet sign...
EPW End-of-line Pressure Switches
EPW end-of-line pressure switches are key components in a dual-line lubrication system Designed to monitor the system, these switches detect the pressure at the end of the respective main line and start the change-over procedure. If the pressure at the end o...